DOI: 10.1016/j.watres.2018.09.027
Scopus记录号: 2-s2.0-85053803608
论文题名: A novel antifouling technique for the crossflow filtration using porous membranes: Experimental and CFD investigations of the periodic feed pressure technique
作者: Zoubeik M. ; Salama A. ; Henni A.
刊名: Water Research
ISSN: 431354
出版年: 2018
卷: 146 起始页码: 159
结束页码: 176
语种: 英语
英文关键词: CFD
; Fouling in porous membranes
; Polymeric-type membranes
; Produced water
英文摘要: Oily water production is one of the many drawbacks of petroleum and several other industries. Finding effective ways for the treatment of produced water remain one of the main areas of interest in membrane sciences. Albeit the many advantages of membrane technology, they suffer from the unavoidable problem of fouling, which results from the accumulation of dispersed materials at the surface of membranes. Membrane modification and operational optimization have been approached as a potential cure of the problem of fouling. In this work we introduce a new and novel method that minimizes the development of fouling and in the same time utilizes no chemicals (i.e., environmentally friendly). The core of this method is based on alternating the pressure in the feed channel in a periodic manner and is therefore named the periodic feed pressure technique, PFPT. The idea is to make pinned droplets at the surface of the membrane lose essential forces that keep them sticking to the surface. The drag force due to permeation flux and the capillary force due to interfacial tension represents the two forces that largely contribute to the pinning of oil droplets at the surface of the membrane. Other forces including buoyancy and lift forces are generally small to be of significant influence. The idea of the PFPT is, therefore, to eliminate the force due to permeation drag. This is done by setting the transmembrane pressure (TMP) to zero at fixed intervals allowing pinned oil droplets to dislodge the surface. When the TMP is set to zero, permeation flux stops and the force due to permeation drag vanishes. This significantly reduces the overall residence time of pinned oil droplets, minimizing the chance for other oil droplets to cluster and coalesce with pinned ones. The PFPT does not cause any damage to the support layer of the polymeric membrane, which is a drawback of back-flushing methodology. The novel PFPT displays minimal membrane fouling and very similar permeation recovery despite only half the cycle time is in filtration mode. In this work, we show how the permeation flux is recovered and provide comparisons between the PFPT and regular filtration methodology. Furthermore, we compare the overall amount of filtrate at the end of the experiments using both methods. It is interesting to note that, the amount of filtrate using the PFPT is very much comparable to that obtained using regular filtration methodology and even higher. By optimizing the frequency of the cycle and the amplitude of the pressure change, it is possible to customize the PFPT to various membrane technologies and to achieve the highest recovery of the flux. Visual inspections of the membranes post operation and post rinsing indicate that membranes undergoing filtration using the PFPT achieves a very clean surface compared with those undergoing regular filtration processes. This method is a promising solution to membrane fouling that is easy to implement without any additional use of chemicals or equipment. Computational fluid dynamics (CFD) investigation is also conducted on microfiltration processes to show why this technique works. © 2018 Elsevier Ltd Citation statistics:
资源类型: 期刊论文
标识符: http://119.78.100.158/handle/2HF3EXSE/112390
Appears in Collections: 气候减缓与适应
There are no files associated with this item.
作者单位: Produced Water Laboratory, University of Regina, Wascana Parkway, Regina, SK S4S 0A2, Canada
Recommended Citation:
Zoubeik M.,Salama A.,Henni A.. A novel antifouling technique for the crossflow filtration using porous membranes: Experimental and CFD investigations of the periodic feed pressure technique[J]. Water Research,2018-01-01,146