Furfural is a biomass derived-chemical that can be used to replace petrochemicals. In this study, dilute sulphuric acid hydrolysis was used for hemicelluloses secession from birch wood. The reaction was investigated at different biomass treatment times (10-90 min, increasing it by 10 min). We found that the greatest amount of furfural 1.4-2.6%, which is 9.7-17.7% from theoretical possible yield, was formed in the first 30 min of the beginning of birch wood pentoses monosaccharide dehydration, but the greatest yield of furfural 10.3%, which is 70.0% from the theoretical yield, can be obtained after 90 min. Given that furfural yield generally does not exceed 50% from the theoretical amount, the result can be considered as very good.
Latvian State Institute of Wood Chemistry, Latvia; Riga Technical University, Latvia
Recommended Citation:
Brazdausks P.,Puke M.,Vedernikovs N.,et al. Influence of biomass pretreatment process time on furfural extraction from birch wood[J]. Environmental and Climate Technologies,2013-01-01,11(1)