globalchange  > 影响、适应和脆弱性
项目编号: 1424374
项目名称:
Collaborative Research: Strain Rate and Moment Accumulation Rate along the San Andreas Fault System from InSAR and GPS
作者: Bridget Smith-Konter
承担单位: University of Hawaii
批准年: 2013
开始日期: 2014-01-06
结束日期: 2017-05-31
资助金额: USD162056
资助来源: US-NSF
项目类别: Continuing grant
国家: US
语种: 英语
特色学科分类: Geosciences - Earth Sciences
英文关键词: strain rate ; earthquake insurance rate ; accurate vector velocity ; major fault ; winsar ; research ; san andreas fault system ; sentinel-1 insar satellite ; western north america insar consortium ; insar measurement ; gmt distribution system ; safs ; gps component ; insar works ; seismic moment rate ; seismic moment accumulation rate ; active fault ; strain accumulation rate ; fault slip rate ; pbo gps datum ; gps datum ; moment magnitude ; gps-4d model-insar technique
英文摘要: The San Andreas Fault System (SAFS) is a natural laboratory for investigating the physics of the earthquake cycle along a major continental transform boundary. Two of the key parameters that can be used for seismic hazard assessment are seismic moment accumulation rate and strain accumulation rate. The GPS component of the Plate Boundary Observatory (PBO) provides accurate vector velocities (< 1 mm/yr accuracy) at a spacing of 10 to 20 km along the SAFS. However, the velocity gradient (strain rate) varies most rapidly within 20 km of the major faults, so strain rate is not well resolved by the GPS data alone. Radar interferometry (InSAR) provides deformation maps at 100 m spatial resolution, although factors such as temporal decorrelation and atmospheric path errors have made it difficult to achieve this full resolution with sufficient precision to improve upon the GPS measurements. The L-band data provided by the ALOS satellite (JAXA) retains phase coherence over longer time intervals than the prior C-band missions. This improvement, combined with stacking techniques to reduce atmospheric errors, now makes it possible to image the entire SAFS using InSAR with unprecedented spatial coverage and resolution.

The primary focus of this research is to construct high spatial resolution vector surface deformation measurements by combining the high accuracy point measurements provided by PBO GPS data with the high spatial resolution InSAR measurements available through WInSAR from foreign and domestic SAR missions. The research has four main objectives:

- Resolve secular plate boundary deformation using new GPS and InSAR measurements provided by EarthScope (PBO and WInSAR). This involves the development of community software to preprocess the new data streams to be provided by the ALOS-2 and Sentinel-1 InSAR satellites (2013 launch);
- Use an integrated GPS-4D model-InSAR technique to better constrain fault slip rates and determine the depth of the locked/creeping transition on active faults of the SAFS;
- Generate high-resolution estimates of strain rate and seismic moment rate along major faults of the SAFS; and
- Explore methods for isolating non-tectonic deformation contributions common in both InSAR and GPS data.

Non-technical summary

Is California prepared for the next big earthquake? Estimates of earthquake potential along major faults, such as the San Andreas Fault System (SAFS), are used for developing scenario earthquakes, for setting regional building codes, and for setting earthquake insurance rates. While the timing of a major earthquake cannot be accurately predicted, the moment magnitude can be accurately estimated from geodetic measurements of present-day crustal deformation. The current array of 700 continuously operating GPS stations in western North America does not completely resolve the crustal deformation gradients (strain) along the major faults because the average station spacing is too large. This research is refining the crustal deformation measurements by computing and modeling the synthetic aperture radar data (SAR) archived at the Western North America InSAR consortium (WInSAR) and the Alaska Satellite Facility. This involves the generation and archive of large-scale (1000 km scale) crustal deformation grids at 0.5 km spatial resolution in a near-automatic fashion. Funding from this grant is supporting two Ph.D. students at SIO and UTEP (a Hispanic Serving Institute) and is being used for further development of undergraduate and graduate courses. This funding is also being used to develop a ?How InSAR Works? module for use in IRISʼs Active Earth interactive kiosks on display around the country. In addition, funding is being used to move the GMTSAR software into the GMT distribution system where it is available to 15,000 users worldwide. We are distributing all high-resolution vector deformation data and maps to the scientific community and archive the results at UNAVCO.
资源类型: 项目
标识符: http://119.78.100.158/handle/2HF3EXSE/97435
Appears in Collections:影响、适应和脆弱性
气候减缓与适应

Files in This Item:

There are no files associated with this item.


Recommended Citation:
Bridget Smith-Konter. Collaborative Research: Strain Rate and Moment Accumulation Rate along the San Andreas Fault System from InSAR and GPS. 2013-01-01.
Service
Recommend this item
Sava as my favorate item
Show this item's statistics
Export Endnote File
Google Scholar
Similar articles in Google Scholar
[Bridget Smith-Konter]'s Articles
百度学术
Similar articles in Baidu Scholar
[Bridget Smith-Konter]'s Articles
CSDL cross search
Similar articles in CSDL Cross Search
[Bridget Smith-Konter]‘s Articles
Related Copyright Policies
Null
收藏/分享
所有评论 (0)
暂无评论
 

Items in IR are protected by copyright, with all rights reserved, unless otherwise indicated.